| COMPRESSION PISTON RING (SQ. FACE) |
COMPRESSION PISTON RING (TAPER FACE) |
BEARING SHELL IN CONNECTING ROD |
NOZZLE OPENING SLEEVE |
HOSE |
| CLAMP |
CAM SHAFT THRUST BEARING |
COVER, VALVE OPENING |
DOWEL, TAPER, PLATE TO BASE |
BEARING, GEAR END |
| RING, DEFUSER |
TURBINE CASING |
LOCATING FOOT |
CLAIM PLATE |
LOCK WASHER, 1/2″ |
| LOCK WASHER, 1/4″ |
LOCK WASHER 3/4″ |
LOCK WASHER 3/8″ |
LOCK WASHER 5/8″ |
BLOWER INLET CASING |
| CAP SCREW, BLOWER INLET TO BLOWER CASING, 1/2-13X1-1/4 |
STUD TO INTERMEDIATE CASING, 1/2-13X1-7/8 |
INTERMEDIATE CASING |
CAP SCREW CLAMP TO CASING, 3/8-16X2, SOC.H |
CAP SCREW, INTERMEDIATE TO TERBINE CASING, 1/2-13X3 SOC.H. |
| MACHINE, SCREW, BLOWER OIL SEAL TO CASING, NO. 10-24X1/2 FLH |
GASKET, INTERMEDIATE TO TURBINE CASING |
TURBINE CASING |
INLET CASING AND NOZZLE RING (STD.OFFSET AND MARINE |
INLET CASING AND NOZZLE RING (DUAL FUEL) |
| INLET CASING AND NOZLE RING (BELOWS MANIFOLD) |
INLET CASING AND NOZZLE RING (STD) |
INLET CASING AND NOZZLE RING (SINGLE DUCT MANIFOLD) |
INLET CASING AND NOZZLE RING (MARINE) |
INLET CASING AND NOZZLE RING (EIGHT DUCT AND DUAL FUEL) |
| INLET CASING (STD OFFSET AND MANNE) |
INLET CASING (STRAIGHT AND STREAMLINE SINGLE DUCT) |
INLET CASING (DUAL FUEL) |
INLET CASING (CONCENTRIC, BELOWS MANIFOLD) |
INLET CASING (FOUR DUCT AND MARINE) |
| INLET CASING AND NOZZLE RING (EIGHT DUCT) |
BOLT, SPL. NOZZLE RING TO CASING |
MACHINE SCREW, INLET CASING LOCATING, 3\8-16 X 3\4,F1. H |
CONNECTOR, INLET CASING TO MANIFOLD (STRAIGHT SINGLE DUCT) |
CONNECTOR, INLET CASING TO MANIFOLD (STRAIGHT SINGLE DUCT ONLY) |
| GASKET CONNECTOR TO INLET CASING (STRAIGHT AND STREAMLINE SINGLE DUCT) |
CAP SCREW, INLET TO TURBINE CASING (INTEGRAL FLANGE APPLICATION) |
CAP SCREW, CLAMP RING, INLET TO TURBINE CASING, CLAMP RING |
CLAMPING RING, INLET TO TURBINE CASING |
CLAMPING RING, INLET TO TURBINE CASING (8 DUCT) |
| REINFORCING RING, CONNECTOR AND INLET CASING TO TURBINE |
CAPSCREW, BEARING CASING TO CYL. BLOCK, 5/8″-11X2″ LONG |
EXPANSION PLUG, IN NUT, VALVE LEVER CASING |
CASING GEAR FAN DRIVE |
CASING WITH BACK PLATE |
Recent Comments